+8618117273997 weixin
en English
Posttime: 23 Aug, 2022 Views: 280 Author: Raza Akbar

What do you know about integrating sphere?

It is common practice to use an integrating sphere to measure flux or attenuate optical signals if the source of electromagnetic radiation is located outside of the optical device. When radiation is delivered into an integrating sphere, it collides with the reflecting walls and experiences several diffuse reflections. An Ulbricht sphere is another name for this device.
With so many refractions, the radiation is spread out very evenly over the sphere’s borders. The total amount of radiation is easy to measure with a detector and is proportional to the amount of radiation at the beginning.
To normalize disparate light densities, an integration sphere is used (spatial integration). That may be used in two main contexts: Illuminating a space with a uniform field of light measured from a source with a non-uniform density. The latter is very helpful in the field of image analysis.

Using an Integrating Sphere
To take an irradiance reading, the sample (here, a light source) is positioned in front of the sphere’s opening (2) during the measurement acquisition process. If the sample is put inside the integrating sphere (4), the total amount of radiant flux can be measured.
LISUN makes integrating spheres of the highest quality. LISUN has been producing integrating spheres for a long time.
Because light rays bounce off the coating many times, the integrating sphere is lit up evenly no matter how it is used to measure.

Integrating sphere

Figure: Integrating sphere

Uses for Integrating Spheres
1. Total luminous flux measurement from light sources is one of the most popular uses for an integrating sphere. When used in these ways, the diameter of an integrating sphere could be anywhere from a few centimeters to several meters.
2. The optimal size of an integrating sphere is dependent on the size of the light source. However, bigger spheres often provide better uniformity owing to their greater surface area.
3. Integrating spheres are used with spectrometers to find out about basic spectral properties like the dominant wavelength, the color of the light, and how the power is spread across the spectrum.
4. A laser beam, or even a source with a wider beam like a laser diode, may be captured and integrated using an integrating sphere. It can be made to work in a wide range of angles over a large area without affecting the quality of the detector’s output in any meaningful way.
5. Similarly, to a cosine corrector, these instruments provide an excellent method of gauging irradiance. If it is built right, the output aperture of an integrating sphere can provide a nearly perfect diffuse and Lambertian light source from any angle.
6. Since the light source will not be in the center, the 2-pi measurement will not be affected.
7. The glass used in greenhouses and other agricultural applications is only one example of where precise spectrum information is required, and this is where integrator spheres come in handy.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997

 

Tags:

Leave Message

Your email address will not be published. Required fields are marked *

=