Test standard for sand dust test chamber

The scientific name of sand dust test chamber is dustproof test chamber, which is implemented according to international national standard parameters such as GB4208-2017 Degrees of Protection Provided by Enclosures (IP Code). It tests the physical and other related properties of the product under the climate conditions simulating natural dust. After the test, the performance of the product is judged to meet the requirements by verification, so as to facilitate the design, improvement, verification and delivery inspection of the product.

The main function of the sand dust test chamber is to apply to electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts, and to test whether electronic and electrical products, shells and seals can guarantee the good performance of equipment and components in a dusty environment.

There are 1-6 types of sand dust test chamber. The common test is the IP56X sand and dust test grade, which is also applicable to the tests of IP5X and IP6X specified in the enclosure protection grade standard. There are 1-6 types of sand and dust test boxes. The common test is the IP56X sand and dust test grade, which is also applicable to the tests of IP5X and IP6X specified in the enclosure protection grade standard. It requires the use of dry talcum powder medium for dust, but cannot use sand to do the test. Standard requirements: talcum powder shall be filtered through metal square mesh sieve. The wire diameter is 50um, and the mesh size is 75um. The amount of talcum powder is 2kg/m3. The criterion is that the dust cannot be completely prevented from entering, but the amount of dust entering shall not affect the normal operation of the equipment.

What is the dustproof grade of sand dust test chamber?
1. IP1X – Prevent human body (such as palm) from accidentally contacting the internal parts of electrical appliances, and prevent the entry of foreign objects with larger size (diameter greater than 5mm).
2. IP2X – Prevent people’s fingers from touching the parts inside the appliance, and prevent the invasion of foreign objects of medium size (diameter greater than 12.5mm).
3. IP3X – Prevent tools, wires and similar small foreign objects with diameter or thickness greater than 2.5mm from invading and contacting parts inside the appliance.
4. IP4X – Prevent tools, wires and similar small foreign objects with diameter or thickness greater than 1CM from invading and contacting the parts inside the appliance
5. IP5X can partially prevent dust intrusion (no harmful sediment will be generated). Although it cannot completely prevent dust intrusion, the amount of dust intrusion will not affect the normal operation of electrical appliances.
6. IP6X fully sealed to prevent foreign objects and dust intrusion

Test standard for sand dust test chamber:
1. The dust is mainly dry talcum powder medium;
2. The wire diameter is 50um, and the mesh size is 75um.
3. The amount of talcum powder is 2kg/m3.
4. Temperature range: RT+10~40 ℃ (specify when ordering);
5. Vacuum gauge range: 0-10Kpa (adjustable);
6. Air extraction speed: 0-2400L/H (adjustable).
7. Dust suppression mode of sand dust test box: free dust suppression;
8. Total test time: 0-999H (adjustable);
9. Vibration time: 0-999H (adjustable);

LISUN lauched SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. After the measurement, it is judged whether the performance of the product meets the requirements through verification, so as to facilitate the design, improvement, verification and factory inspection of the product. Comply meets IEC60529:1989 +A1:1999 +A2: 2013 <Degrees of protection provided by enclosures (IP Code)>,IEC60598-1,  GB2423.37-89 (Test L: dust test methods), GB4208, GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB7000.1 <Luminaires Part 1: General Requirements and Tests> 9.2.1, 9.2.2 and Figure 6, DIN40050 and IP5K0. The dust test chamber is applicable to the IP5X and IP6X dustproof test of the products.

SC-015 Dustproof Testing Machine | Dust Proof Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997