+8618117273997 weixin
en English
Posttime: 28 Oct, 2022 Views: 264 Author: Jacky

Requirements for test conditions of sand dust chamber and importance of procurement

The scientific name of the sand dust chamber is dust resistance tester, dustproof test chamber and other different names. It is an instrument used for IP dustproof test of products. The dustproof test box equipment is helpful to evaluate the ability of the equipment to resist the impact of dust that may block the opening, penetrate into cracks, gaps, bearings and joints. Its application scope includes but is not limited to electrical appliances, lighting fixtures, instruments, intelligent robots, camera equipment, vacuum cleaners, sweepers and other products.

The sand dust chamber is strict with the medium used, the dust is dry talcum powder, and the talcum powder should be filtered by a metal square hole sieve. The wire diameter is 50um, and the mesh size is 75um. The amount of talcum powder is 2kg/m3. The criterion is that the dust cannot be completely prevented from entering, but the amount of dust entering shall not affect the normal operation of the equipment.

The sand dust chamber has two test methods:
1. When the air pressure in the box is lower than the ambient atmospheric pressure, it is caused by the thermal circulation effect. The vacuum pump is used to keep the air pressure lower than the atmospheric pressure, and the air extraction air should be connected to the hole specially set for the test.
2. When the air pressure in the enclosure is the same as the ambient air pressure, the tested enclosure shall be put into the test chamber according to the normal working position, but not connected with the vacuum pump. The drain hole opened under normal conditions shall be kept open during the test, and the test duration shall be 8h.

What is the importance of purchasing sand dust chamber?
1. The purchase of sand and dust chamber is also a relatively concerned issue for the purchaser. Whether it is rain test box or dust proof test box, or high temperature and high pressure spray box, it can also be said that it is a big thing. So why? I don’t know if you have noticed that there are many kinds of environmental test chambers, which are often dazzling and confusing.
2. There are also many problems to consider when selecting sand dust chambers, such as equipment quality, process, manufacturer’s manufacturing technology, or price.
3. First of all, the equipment is selected correctly. For the future product testing of the company, you can test as much as you want. Secondly, it can improve the competitiveness of the company’s products, so that users are less affected by a large amount of dust when using the product. In this way, the quality of the company’s products has been improved, which also increases the company’s popularity.
4. There is also the importance of sand dust chamber procurement, such as the requirements of functional parameters, protection grade, size of specifications, etc.

LISUN lauched SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. After the measurement, it is judged whether the performance of the product meets the requirements through verification, so as to facilitate the design, improvement, verification and factory inspection of the product. Comply meets IEC60529:1989 +A1:1999 +A2: 2013 <Degrees of protection provided by enclosures (IP Code)>,IEC60598-1,  GB2423.37-89 (Test L: dust test methods), GB4208, GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB7000.1 <Luminaires Part 1: General Requirements and Tests> 9.2.1, 9.2.2 and Figure 6, DIN40050 and IP5K0. The dust test chamber is applicable to the IP5X and IP6X dustproof test of the products.

Dust test chamber SC 015 AL

SC-015 Dustproof Testing Machine | Dust Proof Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are GoniophotometerIntegrating SphereSpectroradiometerSurge GeneratorESD Simulator GunsEMI ReceiverEMC Test EquipmentElectrical Safety TesterEnvironmental ChamberTemperature ChamberClimate ChamberThermal ChamberSalt Spray TestDust Test ChamberWaterproof TestRoHS Test (EDXRF)Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997

Tags:

Leave Message

Your email address will not be published. Required fields are marked *

=