Is there any difference between water resistance tester and IP waterproof test equipment

Is there any difference between water resistance tester and IP waterproof test equipment?
In fact, their essence is the same. Water resistance tester can also be called rain test chamber, IP waterproof test equipment, waterproof testing machines, waterproof testing devices, etc., but their names are different.
The water resistance tester can meet national and international standards such as: IEC60,529:1989+A1:1999+A2:2013 Degrees of protection provided by enclosures (IP Code) and GB/T4208-2017 Degrees of protection by enclosures (IP Code).

It can simulate different waterproof tests, such as drip test, water spraying test, spray test, immersion test, etc. It can be used to test the waterproof grade of products 1-9.
The types of water resistance tester include IPX1/2 drip box, IPX3/4 swing pipe water spray test equipment, IPX5/6 waterproof jet test device, IPX7 immersion tank waterproof test device, IPX8 immersion tank waterproof test device, IPX9 high temperature and high pressure spray test chamber, multi-functional rain chamber and comprehensive waterproof, etc. In addition, IP5/6 is the model of sand dust test chamber. Of course! These can be customized according to the needs of users.

Some features of the water resistance tester:
1. The shell is made of domestic steel plate, the surface is painted, beautiful and durable.
2. All inner boxes and turntables are made of SUS304 # stainless steel plate, which will not rust after long-term use.
3. Box structure; With water tank and circulating water; Automatic water inlet control and low water level alarm detection can effectively prevent water shortage and damage of the pump.
4. There is a transparent observation window (tempered glass material) on the door, and there is a transparent observation window LED inside the box to facilitate the observation of the lighting.
5. The 7-inch touch screen is the core control system+Panasonic PLC. If imported brands such as electrical components LS are used, the wiring process meets the requirements of national standards, the plate layout is reasonable, the wiring is firm, and the identification is clear.
6. The equipment base is equipped with four brake wheels for ease of movement and fixation.

Test requirements for water resistance tester:
Test requirements for water resistance tester ipx7:
When the low point of the shell is less than 850mm in height, it should be 1000mm lower than the water surface;
If it is equal to or greater than the high point of the shell, it shall be 150mm lower than the water surface; In addition, the temperature difference between the water temperature and the sample is not greater than 5K; Test duration: 30min;
Test requirements for water resistance tester ipx56:
The inner diameter of IPX5 nozzle is 6.3mm; IPX6 is 12.5mm; IPX5 water flow: 12.5 ± 0.625L/min; IPX6 is 100 ± 5L/min; The central part IPX5 of the main water flow is a circle with a diameter of about 40mm at 2.5m from the nozzle; IPX6 is 120mm; The water pressure is adjusted according to the specified water flow; Water spraying time per square meter of shell surface: about 1min; The distance from the water nozzle to the shell surface: 2.5-3m.

LISUN lauched JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

JL-X IP Waterproof Test Equipments

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997