How to use a high-frequency analyzer portable spectrum analyzer

The amplitude (intensity) of a signal is measured and shown by a spectrum analyzer as it fluctuates with frequency within a certain frequency range (spectrum). Radiofrequency (RF) circuits, modules, and units are all tested using a USB spectrum analyzer.
Electronics manufacture and testing, as well as servicing and maintenance in the field, are just a few of the numerous uses for these devices. Signal bandwidths may be shown and measured using these test devices since they plot amplitude vs frequency.
Investigating the correct working of RF circuits requires proficiency with a spectrum analyzer. Observing the controls is an excellent approach to learning how to operate a spectrum analyzer.
Despite its intimidating appearance, a spectrum analyzer is rather simple to operate once you get the hang of it.
Each analyzer is unique, but the fundamental ideas are the same across all instruments: the same measurement types may be performed, and the same basic controls are provided. These fundamental abilities may be transferred from one spectrum analyzer to another after one instrument has been utilized.

How to use a spectrum analyzer
A spectrum analyzer has several knobs and interfaces. A little experience is all that is needed for the control of various pieces of test equipment, even if they may seem to be difficult to operate at first glance.

Display
One of the most important aspects of a spectrum analyzer’s display is its use. Ten main horizontal and ten major vertical divisions are usual in the graticule of the display.
Linearly calibrated in frequency, the analyzer’s horizontal axis is located on the right-hand side of the display. Amplitude is measured on the vertical axis. However, it is feasible to use a different scale for certain measurements, such as a logarithmic one or a linear one.

Setting the frequency
When calibrating the frequency of a spectrum analyzer, you have a choice between two options. These options may be made independently of one another by using other controllers or the keypad:
You may choose a frequency for the center of the scale by selecting it from a drop-down menu. The monitoring signal is usually found here. It’s the most commonplace. As a result, the primary signal is shown in the center of the screen, while you may watch the frequencies on each side.
You may also enter the sweep’s start and stop or top and bottom frequencies into many analyzers instead of only the span and center frequency. LISUN has the best analyzers.

Scan rate
As the name implies, the spectrum analyzer works by scanning a certain frequency range from the low to the high end as needed. The rate at which it does this is critical. The quicker it scans the range, the more quickly it may produce the measurement.
However, the speed of the test instrument’s scan is constrained by two additional factors. These are the filters utilized in the IF and the video filter that you may use to average the readings. Signals will be lost if these filters don’t react in time, and the measurements will be meaningless.

Final thought
Inspecting a spectrum analyzer with the controls listed above can give you a solid idea of using one, even if your instrument has more. Regarding RF design, development, and testing, spectrum analyzers are an essential piece of test equipment.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997