Features and Maintenance of IPX9K Waterproof Test Chamber

IPX9K waterproof test chamber is applied to automobiles, buses, motorcycles, battery packs, charging piles, containers, energy storage cabinets, laser radars, millimeter wave light radars, etc. An IPX9 and IPX9K waterproof grade test can be conducted for the shell of the above products.

Executive standard:
According to IEC60529, GB4208, GB7000.1, DIN40050-9, ISO20653 and VW80000 standards

Features of IPX9K waterproof test chamber:
1. The ipx9k waterproof test chamber is applicable to the IPX9K waterproof grade test of products.
2. The shell is made of steel plate, and the surface is sprayed with silver gray baking paint, which is beautiful and durable.
3. The turntable is made of SUS304 # stainless steel plate to ensure no rust after long time use.
4. Open structure; It also has its own water tank and can not recycle water; Automatically control water inflow.
5. Four fan-shaped nozzles are uniformly distributed within 90 ° vertically in the middle of the box, which are designed and manufactured in strict accordance with the standard.
6. Turntable drive: using stepping motor, the speed can be set (adjustable) on the touch screen, and adjustable within the standard range.
7. Ipx9k waterproof test chamber adopts the original Italian imported water pump, which is resistant to high temperature and high pressure, can be used for a long time, and has stable performance.
8. The test time can be set on the touch screen, and the setting range is 0-999min (adjustable).

Introduction to Maintenance of IPX9K Waterproof Test Chamber
1. If the test is not conducted for a long time, the water in the storage tank shall be drained; The water in the water tank cannot be stored for more than 3-7 days, and the replacement time depends on the use frequency and water quality.
2. The stainless steel filter in the waterproof test chamber shall be disassembled and cleaned within 2 months, and the water tank shall be cleaned without any other impurities.
3. The waterproof test chamber shall be started and tested once within one month. Please do not store it for a long time.
4. When the equipment is restarted, the interval time should exceed 15 seconds; If the frequency converter is not started due to quick restart, the equipment cannot operate normally.
5. The force value shall be checked once or twice within one year.
6. Before testing in the waterproof test chamber, pay attention to cleaning the label paper and plastic film that are easy to fall off on the surface of the sample, so as to prevent the filter from falling into the water tank and blocking the water pump.
7. In order to maintain the long-term efficiency of the water pump, the following preventive maintenance intervals are recommended.
8. According to the date of the calibration certificate, the local third-party organization shall be found in time for calibration; Once a year.
9. To maintain the long-term efficiency of the water pump, the following preventive maintenance intervals are recommended.

LISUN lauched JL-9K1L High Temperature & Pressure Jet Waterproof Test Chamber is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, GB4208, DIN40050-9，GB7000.1，ISO20653 and VW80000 for protection level IPX9K testing. It is a waterproof test machine designed for vehicle spare parts, electrical and electronic industry, to simulate natural environment or human factors.

The both interior and exterior material of this chamber is high quality stainless steel, big glass observation window and elegant appearance. The turntable and spray lance adopt imported motor, and the rotation speed is adjustable.

JL-9K1L High Temperature Pressure Jet Waterproof Test Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997