Brief introduction to the testing method of rain IP testing instrument ipx123456

Rain IP testing instrument can also be called rain test boxes, waterproof testing equipment, waterproof detectors, waterproof testing machines, IP waterproof testing machines, etc., which are applicable to products including but not limited to electronic and electrical products, diving equipment, mobile phones, wrist watches, household appliances, LED lamps, lighting fixtures, swimming pool lamps, connectors, automotive instruments, etc.

Recently, users want to know more about the testing methods of rain IP testing instrument, such as ipx123456. How are they tested? Today, according to this question, we will share and discuss with you as follows:

LISUN JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1.

JL-X IP Waterproof Test Equipments

The rain IP testing instrument ipx123456 test method:
Test method of Drip Box (JL-12): IPX1 refers to preventing dripping from invading, and vertically dripping water drops, such as condensed water, will not cause harmful effects on appliances; IPX2 means that when the inclination is 15 °, the dripping can still be prevented from invading, and the dripping will not cause harmful effects on the appliance.

Swing Pipe Water Spray Test Equipment (JL-34) test method: its spray hole size: diameter 0.4mm; Flow: 1.8L/min ± 0.05 (IPX3); 6L/min±0.05（IPX4）； Pipe swing angle: 120 º (IPX3); 350º（IPX4）； Swinging speed of swing tube: 120 ° back and forth 4S (IPX3); 350 ° back and forth 12S (IPX4);

Waterproof Jet Test Device (JL-56) Test method: nozzle inner diameter: IPX5 is 6.3mm; IPX6 is 12.5mm; Water flow: IPX5 is 12.5 ± 0.625L/min; IPX6 is 100 ± 5L/min; The water pressure is adjusted according to the specified water flow; The center of the main water flow is 2.5m away from the nozzle, and IPX5 is a circle with a diameter of about 40mm; IPX6 is 120mm; The water spraying time is about 1min per square meter of the shell surface; The test time shall be at least 3min.

Precautions for using rain IPx123456 test instrument:
1. The timer will display and start counting down only when the air pressure in the test chamber reaches the set air pressure and the test starts formally. When the set test duration is over, the timer will go off again.
2. During the test, it is used to pressurize the test chamber to simulate the deepwater pressure. The top cover of the test chamber is heavy. When the top cover of the test chamber needs to be opened, use the air pressure of the air compressor to open the top cover.
3. Take out the sample, wipe the water on the surface, and then open the sample to check whether there is water inside. If there is water inside, it is not up to the standard. For specific details, different industries have different rules. Please refer to the corresponding industry standards.

The above is a simple sharing about the test method of the rain IP test instrument ipx123456. Customers can choose the required equipment according to their own needs

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997