You are here: Home / Fiber Optic Spectrometer: Design of Optical Platform

Fiber Optic Spectrometer: Design of Optical Platform

By on July 12, 2012

Signal light gets to the optical platform through a standard optical interface. Firstly it will be collimated by a spherical mirror, the collimating optical will be dispersed by a plane grating, then be focused via a second spherical mirror, finally, spectral image is cast onto a one-dimensional linear detector array.

The optical platform consists of many components, so the user can select the most suitable configuration according to their own applications. The selection of these comments affects the parameters of spectrophotometer greatly, such as diffraction grating, entrance slit, the eliminating second-order diffraction effects filters, and detector coating. As to the sensitivity, resolution, bandwidth, and stray light of spectrometer, the introduction will be made in the later chapters.

About Lisun Group:

Lead in CFL and LED Tester. Click to our product lists:

Goniophotometer
Spectroradiometer
Integrating Sphere
Colorimeter and Photometer
LED Test Instruments
CFL Testing Instruments
EMC testing
Electronic Ballast Tester
Equipments for Testing Electronic components
Electrical Safety Tester
Environmental Chamber
AC and DC power supply
Spectrophotometer

Related posts:

  1. Principles and Applications of Fiber-optic Spectrometer
  2. Online Video: LMS-1000 Fiber Optic Spectrometer
  3. How to select the appropriate grating?
  4. InGaAs Linear Array Detector
  5. From X-rays to X-ray fluorescence then to X-ray fluorescence spectrometer
  6. The development of spectrum instrument in China and the features of the photoelectric spectral analysis
  7. The types and contents of spectral analysis
  8. Characteristics and Applications of Different Type Spectrometer
  9. The process of the sample element evaporation
  10. How to choose the analytical lines of photoelectric spectral analysis
  11. Characteristics and Applications of Different Type Spectrometer
  12. Generalizability theory
  13. The knowledge about the intensity of spectral line
  14. The spectral line width and self-priming
  15. Considering the performance parameters comprehensively when we analyse the quality of LED products
  16. Color Difference SDCM
  17. Russia – installation and training for LSG-1700B Rotation Luminaire Goniophotometer &LPCE-3 LPCE-3 spectrometer integrating sphere system
  18. UV-C LED Prospect
  19. Darkroom Design for a Goniophotometer
  20. The generation of spectral wavelength
  21. Darkroom Design of goniophotometer
  22. How to Choose the Best Optical Resolution?
  23. The response of spectrophotometric measurement sensor
  24. The LED optical properties and requests
  25. LED Quality Evaluation
  26. The optical proper of LED has obvious difference in different temperature.
  27. The difference between main optical names of LED
  28. The difference between main optical names of LED
  29. Typical Applications of Spectrometer
  30. The characteristics of the OBLF spectrometer
  31. The basic knowledge of the spectrometer
  32. The qualitative analysis of the spectrometer
  33. Lisun LED Test Solution and Measuring Method Part1: Electrical and Optical Characteristics
  34. The main points of the LED spectrometer
  35. The development of domestic and international photoelectric direct reading spectrometer
  36. Understand the atomic structure and electronic properties when spectral analysis
  37. The analysis spectral line selection of photoelectric direct reading spectrometer
  38. The application of light color 1
  39. Grating spectrometer measurement analysis spectral properties of illuminant
  40. The importance of heat dissipation design
  41. The actual energy efficiency and luminous efficiency of white LED(Part 2)
  42. Goniophotometer Dark Room Design
  43. How to Design A LED Power Driver
  44. The Second Type Power Source to Increase the Design Flexibility
  45. Building Energy Saving and Luminous Environment Design
  46. Electromagnetic Compatibility (EMC) Design for Vehicle Electronic Equipment 1
  47. Electromagnetic Compatibility (EMC) Design for Vehicle Electronic Equipment 2
  48. Surge Generator Design Scheme for Energy Measurement Test
  49. Surge Generator Design Used for Energy Meter Test
  50. How to design the secondary constant current of LED power
  51. The Simplified LED Thermal Design with Innovative Ceramic Method
  52. How to Judge the Quality of LED?
  53. The Distribution Photometric Measurement Is The Key Link Of The Quality Control In Lamps and illumination design
  54. Knowledge about Spectrometer: Photometric Sensitivity, Stoichiometric Sensitivity, Measuring Time and the Data Transfer Speed
  55. What is the EMI, EMS and EMC?
  56. LED Spectral Parameters
  57. The generation of atomic spectrum
  58. The difference between Integrating Sphere Test System and Goniophotometer
  59. Select the LED light source from nine aspects
  60. LED Lighting development in future
  61. Color difference SDCM
  62. LISUN Design 3m Electric Integrating Sphere
  63. LISUN Design 3m Electric Integrating Sphere
  64. Photometry Glossary
  65. Notice On Obtain Accurate Photometric Data
  66. New Product: LS512A Optical Path Converter
  67. Measurement and Evaluation of the Safety of UV Light Sources|Part3: Principle of Measurement
  68. The research on the reliability of high power white LED
  69. The relationship of LED lighting and power factor
  70. Theories About Light Part2: Photometry and Luminous flux
  71. Online Video: LS280 Multiplex Optical Maintenance Meter
  72. Testing requirements and advantages of LED lights applied in the automotive market
Posted in | Tagged