Archives by date
You are browsing the site archives by date.
In natural environment, temperature and humidity are two indivisible natural factors. Due to different geographical locations in different regions, the temperature and humidity effects generated are also different. This test is used to confirm the products’ adaptability during storage, transportation and usage in the climate of some certain temperature and humidity. Severe levels depend on […]
IEC/EN62471 is the European Union’s testing standards for laser products (including LED). IEC/EN 62471 is designed to evaluate the optical radiation hazards associated with different lamps and lamp systems. And it is also used to replace the IEC/EN60825 standards in the requirements of the LED product energy level. It increased the requirements of the optical […]
When doing EFT test, there have L1, L2, L3, N and PE interface. PE and earth are two different concepts. Electrical fast pulse interference is common mode, in the experimental setup figure of the standard, we can see the signal cable which is from the test generator can connect with corresponding power lines (L1, L2, […]
From the perspective of the LED product structure and technology development, the quality criteria of LED product mainly consider the parameters of the optical properties, electrical properties, thermal properties, radiation safety and life. LED optical properties mainly involve luminous flux, radiation flux, luminous efficiency, chromaticity coordinates, correlated color temperature, color rendering index etc. At present, […]
Waterproof Level Number Protection Level Definition 0 No protection No special protection 1 Prevent water dripping Prevent vertical drop of water 2 Prevent dripping water intrusion even when inclined 15 degrees Can still prevent dripping when the lamp is inclined 15 degrees, 3 Prevent the injection of water intrusion Prevent rain, or vertical to the […]
IP is the abbreviation of Ingress Protection. IP grade is the protection level for electrical equipment shell against the foreign body intrusion. It comes from the international electrical commission standard IEC 60529 which was also used as the national standard of America in 2004. In this standard, for the protection level of electrical equipment shell […]