Archives by date
You are browsing the site archives by date.
What is electronic load? In the narrow sense, electronic load is (or equivalent to) an adjustable resistor. Actually, the electronic load products are generally made of a combination of multiple electronic components for which parameters are variable and can be controlled. Generally, it has a variety of load power consumption modes, such as constant resistance, […]
Color tolerance is usually used to represent the difference between the X, Y value calculate by photo color electrical detection system software and the standard light source. The smaller the value, the higher the accuracy. The spectrum of the standard light source will change with the change of color temperature. With the different color temperatures, […]
Glow wire tester is applied to simulate the situation that insulating material which is easily spread the flame to other parts or solid combustible materials inside the device may light-off due to glow wire or burning components . Under certain conditions, e.g., in the case of the fault current flowing through the wire, the overload […]
1, Glow wire temperature: 500 ~ 1000 °C± 2 °C continuous adjustable 2, Searing time: 0-999.9 s ± 0.1 s adjustable (usually selected for 30s) 3 Light-off time: 0-999.9 s ± 0.1 s, automatic recording, manual timeout 4, Fireouttime: 0-999.9 s ± 0.1 s, automatic recording, manual timeout 5.Glow Wire Element Ni/Cr wire, diameter: 4mm […]
The Glow Wire Tester is designed to carry out fire hazard testing on electrotechnical products in accordance with the provisions of International standards. The control unit is supplied with all the controls and metering necessary to accurately set the temperature of the glow wire. The wire current is continuously variable by means of the panel-mounted controller […]